PyPI JSON API disruption on 7 November 2026
PyPI JSON API from Montreal: degraded checks; 2026-11-07 02:30 UTC to 2026-11-07 05:30 UTC: peak response time 330 ms vs a usual 15 ms.
- What our checks saw
- Degraded
- Cities affected
- Montreal
- When
- to
- How long
- 3 hours
- Slowest check
- 330 ms, usually 15 ms
- PyPI's status page
- Open it
Where our checks saw it
Each glowing city had slow or failing checks during the incident, shown at its worst. We test from 6 cities, so other places may have been hit too.
Our checks, city by city
Each point is one check every 30 minutes, from three hours before the incident to three hours after. Coloured points are the checks we counted as slower or failing. The shaded area shows how far above the usual time they were. Not affected: Amsterdam, San Francisco, Singapore, Tokyo, Mumbai.
Montreal
Every check as a table
| Time (UTC) | Check | Reading |
|---|---|---|
| 23:30 | 121 ms | Normal |
| 00:00 | 121 ms | Normal |
| 00:30 | 122 ms | Normal |
| 01:00 | 403 ms | Much slower, or failing |
| 01:30 | 402 ms | Much slower, or failing |
| 02:00 | 330 ms | Much slower, or failing |
| 02:30 | 329 ms | Much slower, or failing |
| 03:00 | 256 ms | Normal |
| 03:30 | 329 ms | Much slower, or failing |
| 04:00 | 246 ms | Normal |
| 04:30 | 14 ms | Normal |
| 05:00 | 17 ms | Normal |
| 05:30 | 15 ms | Normal |
| 06:00 | 11 ms | Normal |
| 06:30 | 13 ms | Normal |
| 07:00 | 12 ms | Normal |
| 07:30 | 13 ms | Normal |
| 08:00 | 13 ms | Normal |
| 08:30 | 17 ms | Normal |
How fast is your API around the world?
Run a free speed test from multiple cities and find out where your users are waiting. No setup, no account required.
Test my API
No account required · Takes about 30 seconds.