PyPI JSON API disruption on 15 November 2026
PyPI JSON API from Montreal: degraded checks; 2026-11-15 23:00 UTC to 2026-11-16 06:00 UTC: peak response time 327 ms vs a usual 17 ms.
- What our checks saw
- Degraded
- Cities affected
- Montreal
- When
- to
- How long
- 7 hours
- Slowest check
- 327 ms, usually 17 ms
- PyPI's status page
- Open it
Where our checks saw it
Each glowing city had slow or failing checks during the incident, shown at its worst. We test from 6 cities, so other places may have been hit too.
Our checks, city by city
Each point is one check every 30 minutes, from three hours before the incident to three hours after. Coloured points are the checks we counted as slower or failing. The shaded area shows how far above the usual time they were. Not affected: Amsterdam, San Francisco, Singapore, Tokyo, Mumbai.
Montreal
Every check as a table
| Time (UTC) | Check | Reading |
|---|---|---|
| 20:00 | 126 ms | Normal |
| 20:30 | 115 ms | Normal |
| 21:00 | 128 ms | Normal |
| 21:30 | 323 ms | Much slower, or failing |
| 22:00 | 324 ms | Much slower, or failing |
| 22:30 | 323 ms | Much slower, or failing |
| 23:00 | 323 ms | Much slower, or failing |
| 23:30 | 322 ms | Much slower, or failing |
| 00:00 | 329 ms | Much slower, or failing |
| 00:30 | 322 ms | Much slower, or failing |
| 01:00 | 328 ms | Much slower, or failing |
| 01:30 | 323 ms | Much slower, or failing |
| 02:00 | 327 ms | Much slower, or failing |
| 02:30 | 324 ms | Much slower, or failing |
| 03:00 | 329 ms | Much slower, or failing |
| 03:30 | 324 ms | Much slower, or failing |
| 04:00 | 326 ms | Much slower, or failing |
| 04:30 | 322 ms | Much slower, or failing |
| 05:00 | 12 ms | Normal |
| 05:30 | 15 ms | Normal |
| 06:00 | 12 ms | Normal |
| 06:30 | 12 ms | Normal |
| 07:00 | 12 ms | Normal |
| 07:30 | 12 ms | Normal |
| 08:00 | 12 ms | Normal |
| 08:30 | 13 ms | Normal |
| 09:00 | 11 ms | Normal |
How fast is your API around the world?
Run a free speed test from multiple cities and find out where your users are waiting. No setup, no account required.
Test my API
No account required · Takes about 30 seconds.